Investment Casting
Investment casting is known for its ability to produce components of excellent surface finish, dimensional accuracy and complex shapes.
Properties:
• An optimized viscosity
• Quick setting wax with minimal cavitation
• Outstanding constant Dimensionally properties
• Wide injection range (paste to liquid)
• Capable of producing patterns of all sizes and thick or thin sections
• Easy removal from dies
• Outstanding mechanical properties
ا
ی
ر
آ
ن
ا
ی
ن
ب
ر
م
ی
ل
پ
ت
ک
ر
ش
ی
ل
و
ئ
س
م
ا
ب
(
)
د
و
د
ح
م
ت
For more
detailed
information please check our website
:
www.PolyBon.ir
MATERIAL SAFETY DATA SHEET
Revision Date:
2016/08/22
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name:
Non
Ionic
Parrafin Emulsion
Product Grade Designations:
NEP
Manufacturer/Supplier:
Polymer Bonyan Aria
Co Ltd
MSDS Prepared by
Research and development department
Chemical Name
Emulsion
Paraffin Wax
Synonym(s)
Paraffin Wax;
Emulsion
CAS#:
8002
-
74
-
2
OSHA Status
non
-
hazardous
2. COMPOSITION / INFORMATION ON
INGREDIENTS
Weight % Component CAS Registry No.
1
-
40
% Paraffin wax
3. HAZARDS IDENTIFICATION
HMIS® Hazard Ratings:
Health
-
1, Flammability
-
1, Chemical Reactivity
–
0
.
Potential Acute Health Effects:
Slightly hazardous in case of skin contact
(irritant), of eye contact (irritant), of ingestion, of inhalation.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC
EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated
or prolonged
exposure is not known to aggravate medical condition
4. FIRST
-
AID MEASURES
Eye Contact:
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes. Get medical attention
if irritation occurs.
Skin Contact:
Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation
develops.
Serious Skin Contact:
Not available.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give
oxygen. Get medical attention.
Serious Inhalation:
Not available.
Ingestion:
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to
an unconscious perso
n. If large quantities of this material are swallowed, call a physician immediately.
Loosen tight clothing such as a collar, tie, belt or waistband.
Serious Ingestion:
Not available.
ا
ی
ر
آ
ن
ا
ی
ن
ب
ر
م
ی
ل
پ
ت
ک
ر
ش
ی
ل
و
ئ
س
م
ا
ب
(
)
د
و
د
ح
م
ت
For more
detailed
information please check our website
:
www.PolyBon.ir
5. FIRE FIGHTING MEASURES
Auto
-
Ignition Temperature:
245°C (473°F)
-
34
0 C
Flash Points:
CLOSED CUP: 199°C (390.2°F). OPEN CUP: 235°C (455°F).
Flammable Limits:
Not available.
Products of Combustion:
Not available.
Fire Hazards in Presence of Various Substances:
Slightly flammable to flammable in presence of heat. Non
-
flammab
le in presence of shocks.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of
the product in presence of static discharge: Not available.
Extinguishing Media:
water fog, dry chemical, foam, carbon dioxide
Special Fire
-
Fighting Procedures:
Water spray to cool fire exposed surfaces. Wear self
-
contained
breathing apparatus and protective clothing to enter area.
Hazardous Combustion Products:
ca
rbon dioxide, carbon monoxide, formaldehyde, acetaldehyde,
irritating smoke.
General Fire and Explosion Hazards:
Solid product will burn at or above the flash point. Oxygen lean
conditions may produce toxic gases, acrid fumes, irritating smoke. Product may
accumulate a static charge
which could result in an electrical discharge that could ignite polymer dust.
6. ACCIDENTAL RELEASE MEASURES
Sweep or shovel up, place in a container for salvage or disposal. Product is non
-
hazardous in its delivered
form.
7.
HANDLING AND STORAGE
Precautions
:
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the
residue under a fume hood. Ground all equipment containing material. Do not breathe dust. Keep away
from incompatibl
es such as oxidizing agents.
Storage:
Keep container tightly closed. Keep container in a cool, well
-
ventilated area.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering con
trols to keep airborne levels
below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep
exposure to airborne contaminants below the exposure limit.
Personal Protection:
Safety glasses. Lab coat. Dust respira
tor. Be sure to use an approved/certified respirator or equivalent.
Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self
-
contained breathing apparatus should be
used to avoid inhalation of
the product. Suggested protective clothing might not be sufficient; consult a
specialist BEFORE handling this product.
Exposure Limits:
Parrafin Wax (Fume) TWA: 2 STEL: 6 (mg/m3) [Canada] TWA: 2 (mg/m3) from OSHA (PEL) [United
States] TWA: 2 (mg/m3) from A
CGIH (TLV) [United States] TWA: 2 (mg/m3) from NIOSH [United
States] TWA: 2 STEL: 6 [United Kingdom (UK)] Consult local authorities for acceptable exposure limits
ا
ی
ر
آ
ن
ا
ی
ن
ب
ر
م
ی
ل
پ
ت
ک
ر
ش
ی
ل
و
ئ
س
م
ا
ب
(
)
د
و
د
ح
م
ت
For more
detailed
information please check our website
:
www.PolyBon.ir
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Form:
Liquid
Color:
With
Odor:
odorless to mild
Odor Threshold:
not applicable
Specific Gravity:
0.9
7
@ 20 deg. C (Water = 1)
Melting point:
not applicable
Solubility in Water:
negligible
pH:
5
-
7
Thermal Decomposition Temperature:
Thermal stability not tested for each grade, degradation in air
may begi
n
at > 300ºC (573ºF). Low stability hazard expected at normal operating temperatures.
10. STABILITY AND REACTIVITY
Stability:
Product as delivered is stable.
Incompatibility:
Product reacts with strong oxidizing agents, fluorine.
Hazardous Polymerization:
Will not occur.
11. TOXICOLOGICAL INFORMATION
Toxicity data is limited. There has been no evidence of acute toxicity, skin sensitization, or sub
-
acute
subchronic
toxicity as a result of repeated exposure.
Oral LD
-
50: (rat) >6,400 mg/kg
Dermal LD
-
50: (rab
bit) >2,000 mg/kg
Skin Irritation (guinea pig) slight
Skin Sensitization: (guinea pig) none
12. ECOLOGICAL INFORMATION
These products have not been tested for environmental effects. These products are not expected to present
any environmental problems.
13. DISPOSAL CONSIDERATIONS
Discharge, treatment, or disposal may be subject to national, state, or local laws. Incinerate or landfill in
accordance with local regulations.
Emptied containers may retain product residue, follow label warnings even after con
tainer is emptied.
14. TRANSPORT INFORMATION
DOT (USA):
Class not regulated
Sea
-
IMDG (International Maritime Dangerous Goods):
Class not regulated
Air
-
ICAO (International Civil Aviation Organization):
Class not regulated
15. REGULATORY INFORMATION
Note: Information listed in this Section is not meant to be comprehensive, but represents frequently requested information.
WHMIS (Canada) Status:
non
-
controlled
SARA Title III:
In accordance with the provisions of Title III, Sections 311 & 312 of the
Superfund
Amendments and Reauthorization Act
, these products are not hazardous. These products do not contain
Section 313 Reportable Ingredients.
RCRA
: In the form delivered by Negin Baspar Giti Co Ltd, these products are not considered as hazardous
waste,
and are not subject to reporting under the
Resource Conservation and Recovery Act.
CERCLA:
In the event of a spill, the end user should verify whether reporting is required under local,
state, and/or federal regulations.
ا
ی
ر
آ
ن
ا
ی
ن
ب
ر
م
ی
ل
پ
ت
ک
ر
ش
ی
ل
و
ئ
س
م
ا
ب
(
)
د
و
د
ح
م
ت
For more
detailed
information please check our website
:
www.PolyBon.ir
California Prop 65
: In compliance,
no reportable substances
CONEG
: These products are in compliance with the heavy metals requirements.
Ozone Depleting Substances
: none reportable, in compliance with 40 CFR 82.
Carcinogenicity Classification (components present at 0.1% or more): none,
unless listed below:
IARC
(International Agency for Research on Cancer) none
NTP
(National Toxicology Program) none
European Hazardous Chemicals:
none reportable, in compliance with 67/548/EEC, 76/769/EEC,
1999/45/EC,
2002/95/EC (RoHS), 2002/96/EC (WEEE) T
hese polymers are not dangerous according to EC Directives
DSL (Canadian Domestic Substances List) and CEPA (Canadian Environmental Protection Act):
These products are listed on the DSL. Any impurities present in this product are exempt from listing.
EINEC
S (European Inventory of Existing Commercial Chemical Substances):
These products comply
with EINECS requirements. They are 100% polymers and are therefore exempt from listing; the monomer,
ethylene, is
EINECS listed.
AICS / NICNAS (Australian Inventory of
Chemical Substances and National Industrial Chemicals
Notification and Assessment Scheme):
These products are listed on AICS or otherwise comply with
NICNAS.
ENCS, ISHL, MITI (Japan Chemical Substance Inventories):
These products are listed in the
Handboo
k or have been approved in Japan by new substance notification.
ECL (Korean Toxic Substances Control Act):
These products are listed on the Korean inventory or
otherwise comply with the Korean Toxic Substances Control Act.
16. OTHER INFORMATION
For other
information, contact
Polymer Bonyan Aria
Co Ltd 0098 21
22977305
(Saturday
-
Thursday, 8:30am
-
5:00pm
-
Local time)
